Verhuur L'Acoustics MTD112

-Floormonitor: 12"+3" 500W.
-Type: L'Acoustics MTD112.

Passive two-way enclosure (12" LF, 1.4" HF)
High power coaxial driver assembly
Point source radiation (85° conical directivity)
Flexible format for distributed sound reinforcement
Wedge-shaped for floor monitor use
Suitable for medium-power FOH applications
Designed for both fixed installation and touring
Compact, rugged construction, flexible rigging
Analog processor control with sense return protection

Frequency response 70 - 14k Hz (±3 dB) (LLC FRONT position)

 Usable bandwidth 55 - 16k Hz (-10 dB)

 Sensitivity 2.83 Vrms @ 1m) 98 dB SPL 70 - 14k Hz

 Power Rating  45 Vrms 250 Wrms 1000 Wpeak 500 W 8 ohms

 Nominal Directivity (-6dB)  Axi-symmetrical 85° (± 20°)

 System Output - SPL

 One enclosure

 120.5 dB (cont) 126.5 dB (peak) FRONT mode

 122.5 dB (cont) 128.5 dB (peak) X-OVER mode

 FRONT LLC setting provides a 3 dB low frequency contour under freefield conditions

 X-OVER LLC setting applies a 100 Hz high pass filter

Components

LF 1 x 12'' weather resistant loudspeaker (4'' voice coil)

HF 1 x 1.4'' exit compression driver (titanium diaphragm, 3" voice coil, coaxial assembly)

Enclosure

 •Height 540 mm - 21.3 in

 •Front Width 410 mm - 16.1 in

 •Rear Width 165 mm - 6.5 in

 •Depth 375 mm - 14.8 in

 •Trap Angle 45 degrees with respect to vertical

 •Net Weight 27.5 kg

 60.6 lbs

 •Shipping Weight 30.5 kg

 67.2 lbs

 •Shipping Dims

  615 x 470 x 465 mm

  24.2 x 18.5 x 18.3 in

 •Connectors : 2x 4-pin Neutrik speakon

 •Material : 18mm, 30 mm Baltic birch plywood

 •Finish : Maroon-gray™

 •Grill : Black epoxy perforated steel with acoustically transparent foam

 •Rigging : Integrated flying hardware, handles and pole mount socket, Omnimount-ready

 Additional Equipment

 •L-ACOUSTICS LLC112a-st analog controller

 •L-ACOUSTICS SB115, SB118, SB218subwoofers